AFR 345cc As Cast Magnum BBC Head

AFR's Magnum Series

If “Dirty Harry” drove a racecar, it would certainly be fitted with a pair of our 345 or 357 “Magnum” cylinder heads. If huge horsepower is what you are searching for, either of these castings will certainly deliver. With our Race Ready “As Cast” 345cc flirting with 400 CFM and our fully CNC ported 357cc flowing 425 CFM, these heads represent the ultimate in airflow for your BB Chevrolet. Our 357 “Magnum” flows over 415 CFM @ .700 valve lift! No other production style BB Chevy head even comes close. Both of these heads were targeted at larger cubic inch engines (509-632 CID) looking for maximum horsepower and rpm capability with a primary operating range of 3500-8000 rpm’s (This range is an average and will vary with engine displacement and component selection). These heads will also provide impressive torque figures at higher rpm levels. Blown, turbo, and nitrous engines will especially like the larger, higher flowing intake ports.Both of these heads will work best with camshafts exceeding .750 gross valve lift to make better use of the substantial airflow found in the higher lift range. Both the 345cc and the 357cc come standard with AFR's trademark .750” thick head deck, reinforced rocker stud bosses, and are equipped with premium one piece stainless steel 2.300” intake valves and 1.880” exhaust valves. Standard combustion chamber volume is 119cc's on the 345 “As Cast” pieces, while our fully CNC ported 357 version comes with a 121cc chamber. Both are available with an optional 114cc combustion chamber as well. Properly selecting the correct cylinder head depends on a large number of variables. Please consult with one of our sales technicians to assist you in making the best decision for your particular application. Note: Optional stud girdle required for 2° rolled valve angles and 1” longer head bolts needed on four bottom exhaust bolt holes.

Basic Package Components	Part #
Competition 5-angle Valve Job
Intake Valve, 2.300" stainless steel	AFR #7626
Exhaust Valve, 1.880" stainless steel	AFR #7631
1.550" OD Roller Dual Valve Spring with dampener, 255 lbs. on seat, .750" maximum lift	AFR #8031
10 Chrome Moly Retainers	AFR #8511
10 Chrome Moly Valve Locks	AFR#9005
Valve Seals	AFR #6611
Hardened Shims	AFR #8046
Intake Valve Seats	AFR #9062
Exhaust Valve Seats	AFR#9064
Bronze Valve Guides Intake	AFR#9045
Brozne Valve Guides Exhaust	AFR#9046
AFR BB Chevy 7/16" Exhaust Stud	AFR#6406
AFR BB Cehvy 7/16" Intake Stud	AFR#6407
Guide Plates	AFR #6109

All Accessory Holes are Predrilled & Tapped!